Back

Back to product list

AGTIV REACH®

POTATO • Powder Inoculant

AGTIV REACH® P POTATO is a powder inoculant that can be used for in-furrow application or seed-piece treatment.  AGTIV REACH® inoculants with mycorrhizae REACH into the soil and help potatoes uptake more nutrients and water, ensuring that your plants are stronger, healthier, and more vigorous. For optimal results, combine with AGTIV STIMULATE® L POTATO.

Contact us

Directions for use

In-furrow application - AGTIV Liquid Injection Kit

The AGTIV® Liquid Injection Kit, integrating a Dosatron® pump, is a customized equipment designed for the precise application of AGTIV® liquid products.  It is easy to install on your existing in-furrow application system and operates off the main solution flow.

Prepare your product mixture and adjust the Dosatron® injection rate following the calculation chart and application video. Mix well and maintain under agitation during application. A 300 g pouch treats 8 hectares (20 acres) of seedbed. 

Recommendations

• Ensure the tank and the liquid injection system are clean and free of chemical residues, and agitation system is operational.
• On the planter, remove all cylinder screens by the nozzles or use filters with openings of at least 50 mesh (0.28 mm).
• Spray band width should be limited to 7 in (18 cm) or less.
• If the mixture does not contain pesticides or fertilizers, it can be emptied, refrigerated and used within 24 hours.

In-furrow application - Tank mix

Pour the content of a 300 g pouch into 5.7 liters of clean and non-chlorinated water. Mix well and maintain under agitation during application. A 300 g pouch treats 8 hectares (20 acres) of seedbed.

Recommendations

  • Use filters with openings of at least 50 mesh (0.28 mm).
  • Use a diaphragm (or peristaltic) pump for product application.
  • Up and down agitation at all times in the tank.
  • Spray band width should be limited to 7 in (18 cm) or less.
  • Apply within 6 hours after mixing into the liquid tank.
  • See the application video.

Seed-piece treatment

Pour the content of a 300 g pouch into 5.7 liters of clean and non-chlorinated water. Mix well and maintain under agitation during application. A 300 g pouch treats 8 hectares (20 acres) of seedbed.

Recommendations

MILESTONE TREATER:

  • Validate that the atomizing head and the mixing paddles correspond to the approved specifications.
  • Visit this page for more details or contact your representative.

OTHER MODELS:

  • Validate that the atomizing head and the mixing paddles correspond to the approved specifications (ask your representative for more info).
  • Use filters with openings of at least 50 mesh (0.28 mm).
  • Use a diaphragm (or peristaltic) pump for product application
  • Maintain up and down agitation at all times in the tank

Specifications

Active ingredient

MYCORRHIZAE – PTB297 Technology
Rhizophagus irregularis (formerly known as Glomus intraradices)
67 000 viable spores/g

Storage and handling

  • Wear eye protection and gloves when handling the product
  • Store in a cool place (2-12°C, 36-54°F)
  • Do not freeze product
  • Respect the best before date on the label

Blog

See also

AGTIV REACH®

POTATO • Liquid Inoculant

AGTIV STIMULATE®

POTATO • Liquid Inoculant
Premier Tech

North America: +1 866 454-5867

Europe: +33 2 41 52 54 88

Subscribe to our newsletter!

You are now subscribed to our newsletter.