Agtiv

Back to product list

AGTIV®

POTATO • Liquid

AGTIV® POTATO  Liquid is an endomycorrhizal inoculant that has been specially developed for potato production. This product is adapted to the equipment used and allows for a uniform distribution during the treatment of seed pieces or when it is applied in the furrow.

Contact us

Directions for use

In-furrow application - AGTIV Liquid Injection Kit

Designed for an easy application of AGTIV® liquid products, Premier Tech Agriculture recommends a customized equipment, such as the Dosatron® Injection System, for the application of its liquid inoculants.

Learn more about the AGTIV® Liquid Injection Kit.

In-furrow application - Tank mix

Directly in the liquid tank, pour the contents of one 950 ml bottle in the volume of liquid required to treat 4 hectares (10 acres). Refer to this application chart. Apply directly on seed pieces into furrow.
Follow the 7 rules to success.

Volume of water to add in the liquid tank according to the flow rate needed (per bottle of AGTIV® POTATO • Liquid)
FLOW RATE
(l/ha)
WATER
(l)
FLOW RATE
(gal/ac)
WATER
(gal)
47 190 5 50
57 230 6 60
66 265 7 70
76 300 8 80
85 340 9 90
95 380 10 100

 

Recommendations

    7 RULES TO SUCCESS
1

Product must be refrigerated (2-8 °C, 36-46 °F). Store the product at constant temperature at all times. Do not freeze product.

2 Use filters opening of at least 0.28 mm (50 mesh).
3 Use diaphragm pump for product application (or peristaltic pump).
4 Shake the bottle well before use and maintain a constant and effective agitation in the tank during application.
5 Band width should be limited to 7 in (18 cm) or less.
6 Apply within 6 hours after mixing into the liquid tank.
7

Do not use after the best before date indicated on the label.

The insulated box has been designed to allow the product to be kept outside of the fridge for 12 hours at 15 °C (59 °F). Refrigerate upon receipt.

Required equipment 

  • Diaphragm pump or peristaltic pump

  • Clean tank

  • Agitation at all times in the tank

  • Type of agitation (jets and position):
    • Pump > 15 gallons/minute: No inductor nozzle required on the return line.
    • Pump ≤ 15 gallons/minute: An inductor nozzle must be installed.

  • Filters (main pump and agitation pump): 50 mesh or bigger (e.g. 40 mesh)

  • Spray band width: maximum 7 inches at seed level

  • Spray direction: on seed pieces

View how to apply this product into furrow: 

 

Seed-piece treatment

In a clean tank, pour the contents of one 950 ml bottle in the volume of liquid required to treat the amount of seed pieces for 4 hectares  (10 acres) of seedbed (110 000 – 170 000 seed pieces). Apply directly on seed pieces. Do not treat seed pieces more than 48 hours before seeding. Follow the 7 rules to success.

 

Recommendations

    7 RULES TO SUCCESS
1

Product must be refrigerated (2-8 °C, 36-46 °F). Store the product at constant temperature at all times. Do not freeze product.

2 Use filters with openings of at least 0.28 mm (50 mesh).
3 Use diaphragm pump for product application (or peristaltic pump).
4 Shake the bottle well before use and maintain a constant and effective agitation in the tank during application.
5 Band width should be limited to 7 in (18 cm) or less.
6

Do not inoculate seed pieces more than 48 hours before seeding.

7

Do not use after the best before date indicated on the label.

The insulated box has been designed to allow the product to be kept outside of the fridge for 12 hours at 15 °C (59 °F). Refrigerate upon receipt.

Required equipment

Milestone treater:

  • Check if the atomising head and the mixing paddles correspond to the approved specifications (ask your representative for more info).

Other models:

  • Check if the atomising head and the mixing paddles correspond to the approved specifications (ask your representative for more info).
  • Pump and nozzle filters: 50 mesh or bigger (e.g. 40 mesh)
  • Up and down agitation at all times in the tank

View how to treat seed pieces with this product:

Specifications

Active ingredient

Endomycorrhizal inoculum : Glomus intraradices
10 500 viable spores/g

Storage and handling

  • Store in a cool place (2-8°C, 36-46°F)
  • Do not freeze product
  • Respect the best before date on the label

Blog

Absorptive area of mycorrhizal hyphae
Why is Glomus intraradices a superior strain?

  • Quick colonizer
  • Good collaborator
  • Better for P uptake & transfer

Learn more

Ag in Motion 2018

Live Premier Tech’s experience during Ag in Motion 2018

Learn more

See also