AGTIV^® THRIVE™

PEA & LENTIL • Powder Inoculant

AGTIV^® THRIVE™ P PEA & LENTIL is a dual action inoculant with mycorrhizae and rhizobium that makes pulses THRIVE by increasing their nutrient uptake. This peat-based powder inoculant is ideal for mixing with pea, lentil and faba bean seeds at planting time.

Contact us

Description
Directions for use
Specifications

Description

agtiv-inoculant-thrive-powder-pea-lentil

Size: 2.4 kg (5.3 lb) pail & 4.7 kg (10.3 lb) pail
Ingredients: Mycorrhizae, rhizobium, peat powder
Particle Size: < 1 mm (18 mesh)
Bulk Density: 400 g/L (1 lb/US dry qt)

Toolbox

Directions for use

Dry application

One 4.7 kg pail covers:
Peas & faba beans: 16 ha (40 acres)
Lentils: 24 ha (60 acres)

Mix evenly with seeds at the bottom of the grain auger while filling drill, or directly in the drill box. Ensure uniform seed coverage is obtained.
Peas & faba beans: apply at 300 g/ha (120 g or 4.2 oz/acre).
Lentils: apply at 200 g/ha (80 g or 2.8 oz/acre).

Dry seed treater

A dry seed treater can be use to easily deliver AGTIV^® PULSES • Powder onto seeds. It is recommended to perform a calibration test with the device to adjust the flow rate to the drill box filling rate.

Device tested:

Nuttall Seed Inoculator (Nuttall Mfg Ltd, 1-306-345-2359, www.nuttallsystem.com): 4 to 5 minutes is required to empty a 4,7 kg pail set at maximum speed.

Recommendations

For optimum results, it is recommended to seed within the 8 hours following coating with this product.
This product may “bulk up” seeds. It is recommended to calibrate the seeder to ensure correct seeding rate is attained.
Do not mix this product and fungicide seed treatments in the same tank.
Apply to seed sequentially or once treatment is dry.
Do not mix this product with granular fertilizers.

Damp application

One 4.7 kg pail covers 40 acres (16 ha) of seeds.

Pre-moisten seeds with 300 ml of water/100 kg (3 fl. oz/bu) of seeds. Mix the damp seeds thoroughly with the inoculant to ensure even coating.

Recommendations

For optimum results, it is recommended to seed within the 8 hours following coating with this product.
This product may “bulk up” seeds. It is recommended to calibrate the seeder to ensure correct seeding rate is attained.
Do not mix this product and fungicide seed treatments in the same tank.
Apply to seed sequentially or once treatment is dry.
Do not mix this product with granular fertilizers.

Slurry application

One 4.7 kg pail covers:
Peas & faba beans: 16 ha (40 acres)
Lentils: 24 ha (60 acres)

Pour one (1) pail of 4.7 kg in a clean container. Add gradually 8 - 10 litres of clean, non-chlorinated water and stir well. Add more water if the slurry is too thick. Pour onto the seeds and mix thoroughly to ensure even coating.

Recommendations

For optimum results, it is recommended to seed within the 8 hours following coating with this product.
This product may “bulk up” seeds. It is recommended to calibrate the seeder to ensure correct seeding rate is attained.
Do not mix this product and fungicide seed treatments in the same tank.
Apply to seed sequentially or once treatment is dry.
Do not mix this product with granular fertilizers.

Specifications

Active ingredients

MYCORRHIZAE – PTB297 Technology
2 750 viable spores/g
1 248 500 viable spores/lb

RHIZOBIUM – PTB160 Technology
1.6 x 10⁹ viable cells/g
7.3 x 10¹¹ viable cells/lb

Storage and handling

Store in a cool, dry place, out of direct sunlight.
Do not freeze or expose to temperatures above 25°C (77°F).
Avoid severe temperature variation.
Open package only when ready to use.
Respect the best before date on the label.
Product may cause irritation in people with allergies to microorganisms, or immunocompromised individuals.
Handle in a well-ventilated area.
Avoid generating dust during manipulation or wear an approved respirator and googles.
Avoid inhalation and direct contact with the eyes and open wounds.
If inhaled, provide fresh air.
If skin contact, wash with soap and water.
If eye contact, rinse the eyes immediately and thoroughly with water.