Back to product list

AGTIV® FUEL

PEA & LENTIL • Liquid Inoculant

AGTIV® FUEL™ L PEA & LENTIL is a liquid inoculant designed to be used with seed treating systems or for precise in-furrow application. AGTIV® FUEL™ inoculants with rhizobium FUEL peas, lentils and faba beans by fixing nitrogen for better growth.

Contact us

Directions for use

ON SEED application

Shake well before use and apply directly to the seed. Apply 33 ml per 27 kg seeds, ensure full coverage. Optimum on-seed viability for 30 days when treated seeds are stored below 12°C (54°F). Refer to the list of compatible pesticides and liquid fertilizers

Recommendations

  • Open package only when ready to use.
  • Respect the best before date on the label.

Use EXTENDER™ L for AGTIV® inoculants for longer shelf life.

In-furrow application - AGTIV Liquid Injection Kit

A bladder of 8 liters covers 32 ha (80 acres).

This product should be applied using the AGTIV® Liquid Injection Kit, integrating a Dosatron® pump. It is easy to install on your existing in-furrow application system and operates off the main solution flow. To apply, prepare the product mixture and adjust the Dosatron® injection rate following the calculation chart and application video

Apply directly in the seed row at a rate of 250 ml/ha (100 ml/acre). Refer to the list of compatible pesticides and liquid fertilizers.

Recommendations

  • Ensure the tank and the liquid application system are clean and free of chemical residues.
  • Shake well before use and maintain a constant agitation in the tank during application.
  • Calibrate the application system to deliver the correct amount of inoculant.
  • Ensure the temperature of the diluted tank mix doesn’t exceed 22°C (72°F).
  • Apply within 6 hours after mixing into the tank.

In-furrow application - Tank mix

A bladder of 8 liters covers 32 ha (80 acres).

The application rate is 250 ml/ha (100 ml/acre). Dilute the inoculant in the required volume of clean, non-chlorinated water. Refer to the chart. Apply inoculant in the furrow, directly on the seed.

Volume of water to add in the liquid tank according to the flow rate needed (per bladder).
FLOW RATE
(L/ha)
WATER
(L)
FLOW RATE
(gal/acre)
WATER
(gal)
19 600 2 160
38 1 200 4 320
57 1 800 6 480
76 2 400 8 640
95 3 000 10 800
114 3 600 12 960
133 4 200 14 1 120
152 4 800 16 1 280
171 5 400 18 1 440
190 6 000 20 1 600

Recommendations

  • Open package only when ready to use.

  • Shake well before use and maintain a constant and effective agitation in the tank during application.

  • Calibrate the application system to deliver the correct amount of inoculant.

  • Ensure the tank and the liquid application system are clean and free of chemical residues.

  • Ensure the temperature of the diluted tank mix doesn’t exceed 22°C (72°F).

  • Apply within 6 hours following mix into the tank.

  • Respect the best before date on the label.

  • Refer to the list of compatible pesticides and liquid fertilizers.

Specifications

Active ingredients

RHIZOBIUM – PTB160 Technology
Rhizobium leguminosarum biovar viciae
6 x 109 viable cells/g

Storage and handling

  • Store the product in cool place below 20°C (68°F).
  • Do not freeze or expose to intense heat.
  • Wearing safety goggles and gloves is recommended.
  • Avoid direct contact with eyes and skin.
  • If skin or eye contact occurs, rinse immediately with water.

Blog

See also